84
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
4 Adjust the value that you want using the menu knob :.
5 Press the OK button ; or the ESC button = to accept the setting.
✔ The display menu appears in the display again.
6 Press the ESC button = twice to close the display menu.
Configuring the language and speech options
Note: The navigation CD-ROM must already be inserted in the de-
vice before you can change the language and speech options.
You can configure the following settings:
●
LANGUAGE - You can choose between the following languages for the dis-
play content and the navigation speech output:
German, English (metric), English (imperial), French, Italian, Dutch, Span-
ish, Portuguese, Swedish, Danish, Finnish, Czech, Norwegian and Turkish.
●
NAVI (TravelPilot E1) or SPEECH OUTput (TravelPilot E2) - Switches speech
output for navigation on/off.
●
SPEECH OPTion (only TravelPilot E2) - You can choose whether you want
the speech output to provide detailed information on the roads that you are
travelling along (only A-roads and motorways) or whether traffic information
should be provided in detail with road names in the event of a traffic jam
(TRAF. INFO setting).
Note: Navigation speech output depends on the navigation CD be-
ing used. The display content will be displayed in the selected lan-
guage but the speech output might be in English.
16
DimmIng
NAV
T
MC
To Next Page
Loading...
