Blaupunkt TravelPilot E1/E2 - Page 85

85
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
Setting the language
To set the language,
1 press the MENU button ?.
✔ The setup menu appears in the display.
2 Mark and confirm the LANGUAGE menu item.
✔ The available languages are displayed alphabetically.
3 Mark and confirm the language that you want.
✔ The language that you selected is loaded and then the menu is displayed in
that language.
4 Press the ESC button = to close the setup menu.
Configuring speech output
To switch speech output on/off,
1 press the MENU button ?.
✔ The setup menu is displayed.
2 Mark and confirm the NAVI menu item.
TravelPilot E1
✔ The menu for selecting the setting is displayed.
3 Select ON or OFF using the menu knob :.
4 Press the OK button ; or the ESC button = to accept the setting.
✔ The setup menu is displayed again.
5 Press the ESC button = to close the setup menu.
TravelPilot E2
✔ The navi setup menu is displayed.
3 Mark and confirm the SPEECH OUTput menu item.
✔ The menu for selecting the setting is displayed.
NAVI
DISPLAY
LANGUAGE
CLOCK
SE==INGS
NAV
T MC
SPEECH OUT
OPT ROUTE
SPEECH OPT
NAVI
NAV
T MC
NAVI
DISPLAY
LANGUAGE
CLOCK
SE==INGS
NAV
T MC