24
5) You must use an in-line water filter with at least a one
GPM rating.
****Recommend putting a “T” in the ½” waterline, with a
ball valve and a ¾” BIB hose connector. Then use a flexible
water line with ¾” BIB hose connecter on one end and a
3/8” compression end on the other.
6 Have the following requirements been met for providing power
to the unit:
1) Power Requirements have been met (section 1.14).
2) Do not use any other electrical equipment on the same
circuit or you risk overloading the circuit and either burn-
ing the fuse or possibly the electronics inside the unit.
3) You must use a surge suppressor or a GFI protected
outlet.
****Receptacle needs to be within 4 feet of the unit
7 Ice machine needs to be installed and operational.
I have personally verified that the items on this checklist are completed and the
space is ready for installation of Blendtec dispensing equipment. I understand
that if the prep work identified on this installation checklist is not complete, my
store may be liable for a portion or all of the cost of any service call where a
technician is not able to do the install due to incomplete prep work.
Signature:_______________________________________ Date:______________
NOTE: If this Blendtec dispensing equipment is not installed in accordance with
the pre-installation checklist, we cannot guarantee the proper operation of the
equipment and your warranty will be void.
To Next Page
Loading...
