Blink SemaConnect US - Operation Process; Operating Sequence; Operating Procedure

28
5. Operation Process
•
System Initialization
•
User Authorization
•
Plug in DC Charging Connector
•
Preparing for Charging
•
In Charging
•
Charging Terminated
•
Alarm Messages
•
Status Messages
5.1 Operating Sequence
•
When the charger is powered on, it start with the “ Charging Station” Initializing
page.
•
You will see the below image on the screen after powering on and the system is
initializing.
•
The initializing process will take around 2 minutes, then shows home page.
5.2 Operating Procedure
5.2.1 System Initialization
Initializing page
semaconnect.com