INSPECTION BOOK DUPLEX-S2
31
Set-up protocol
BlitzRotary GmbH
Hüfinger Str.55
78199 Bräunlingen,
Germany
Complete this form in full after successful installation, tick the appropriate boxes and sign the form.
Copy the original and send it within one week to the manufacturer.
Leave a copy in the inspection book.
The in-ground truck lift Duplex-S2,
Type .............................................................
Machine/serial number: .............................................................
was installed on .............................................................
at .............................................................
(address)
.............................................................
checked for functionality and safety and was commissioned.
Installation was carried out by operator / competent person
The operator verifies the set-up of the lift. All information in these operating instructions and the inspection
book have been read and understood. The documentation is available to the operators at all times.
The competent person verifies the correct lift installation. All information in the operating instructions and the
inspection book have been read. The documentation was handed over to the operator.
...................... ............................................................ ..............................................
Date Name of operator + company stamp Signature of operator
...................... ............................................................ ..............................................
Date Name of competent person Signature of competent person
.....................................................................................................
Customer service partner