Operation
MenuSelect Control for Models BCX 14 and BX 14
PRODUCT PROGRAMMING
Entering the Program Mode
1. Press the PROGRAM KEY (17). If the control
is password protected, the display reads EN
TER CODE. Use the alpha/numeric keypad
to enter the manager pass code 3124, then
press the center of the dial to enter the
program mode.
Naming a Product Recipe
NOTE: Use the following procedure to name a
new product or edit the name of an
existing product.
1. For a new recipe, turn the dial to the first open
product. Press the center of the dial to select.
To edit an existing name, rotate the dial to
the name to be changed. Press the center
of the dial to select.
2. Use the dial to scroll down to Edit Name.
Press the center of the dial to enter the
edit name menu.
3. Turn the dial or use the alpha/numeric keypad
to select the first character. Press the center of
the dial to advance to the next character. Re
peat for all remaining characters.
NOTE: Product names may be up to 10
characters long and can contain
spaces. Use the #1 key to insert
spaces in a recipe name.
NOTE: To select letters using the keypad,
press the appropriate key once if you
need the first letter on the key, twice
for the second and three times for the
third. For example to enter the letter L
press the #5 key three times.
4. Press the PROG KEY (17). With SAVE
highlighted, press the dial to save the
product name.
Programming a Product Recipe
NOTE: The control can hold 99 recipes. Each rec
ipe may have up to 6 cooking stages.
1. Turn the dial to highlight the name of the
product to be programmed. Press the
center of the dial to select the product.
2. The display reads PRODUCT NAME: STAGE 1.
Press the center of the dial to select the stage.
3. Rotate the dial, or use the alpha/numeric key
pad to enter the desired bake time. Press the
center of the dial to set the bake time.
NOTE: Time is set in one minute increments
using the dial. To set time in less
than one minute increments use the
alpha/ numeric keypad.
4. Rotate the dial to select the desired
cooking mode. Choose from combi,
steam, hot air or Retherm. Press the
center of the dial to set the cook mode.
If Combi or Retherm are selected, rotate
the dial, or use the alpha/numeric keypad
to enter the desired percentage of steam.
5. Rotate the dial, or use the alpha/numeric
key pad to enter the desired cook
temperature. Press the center of the dial
to set the bake temperature.
NOTE: Temperature is set in 5 degree incre
ments using the dial. To set time in
less than 5 degree increments use
the alpha/numeric keypad.
NOTE: Retherm has a temperature limit of
250 300_F.
6. Rotate the dial to select the desired fan speed.
Choose from gentle, low, high or turbo. Press
the center of the dial to set the fan speed.
To Next Page
Loading...
