Blodgett BCX14E - Standard Control Second Level Programming; Combi Manual Control Temp Offset

B l o d g e t t O v e n
Page
4
Standard Control Second Level Programming
Combi Manual Control Temp. (BP# 39673)
Instructions For +7° Temperature Offset
Recommended: Read instructions before programming. If each step is not
conducted within 9 seconds, the control will lock up and the programming
sequence will have to be restarted from step 1
1. Power oven off
2
. Power on oven in Combi Mode
3.
Press and Hold
for 5 seconds and release
4. Press and hold for 5 seconds and release
5. Toggle until "2 X X X" is displayed. Where "X X X" are any number
6. Press and release PROBE LED will begin to Flash
7. Toggle or until Screed displays "P 2 0 7"
8. Press and release TIMER LED will begin to flash
9. Press until Screen displays "P 3 X X" where "X X" are any number
10. Press and release PROBE LED will begin to flash
11. Toggle or until Screed displays "P 3 0 0"
12. Do not touch oven for 10 seconds. "0 0 0" will appear. Temp. offset is now programmed
13. Turn off oven and turn back on