Changing Settings on the SuperUser Display
Temperature Unit
You use the Temp. unit setting to specify which temperature unit you want to
use. The default setting is Celsius.
1. On the SuperUser display, touch Settings, and then touch Temp. unit.
2. Drag your finger up or down to select Celsius or Fahrenheit, and then touch
OK.
Adjustments
Cook and Hold Offset
You use the Cook and hold offset setting to specify the difference between the
core temperature and the oven chamber temperature when Cook & Hold
cooking mode is used. The default setting is 5.
1. On the SuperUser display, touch Adjustments, and then touch Cook and
hold offset.
2. Drag your finger up or down to select 3, 5 or 10 and then touch OK.
DeltaT Offset
You use the DeltaT offset setting to specify the difference between the core
temperature and the oven chamber temperature when DeltaT cooking mode is
used. The default setting is 20.
1. On the SuperUser display, touch Adjustments, and then touch DeltaT offset.
2. Drag your finger up or down to select a setting between 10 and 70 and
then touch OK.
SERVICE MANUAL 15
To Next Page
Loading...
Need help?
General
