Settings on the Technician Menu
Making Temperature Adjustments
Use this function to adjust the oven or the core temperature offsets. This is useful
when the temperature should correspond with the temperature of a 3rd party
probe. The default setting is 0.
Adjust the Oven Temperature
1. On the Technician display, touch Adjustments.
2. Touch Oven temp offset.
3. Slide your finger up or down to select the preferred offset. You can adjust
the temperature offset up or down by 10°C (18°F) in 1°C increments which
is equal to 1.8⁰F at a time.
Adjust the Core Temperature
1. On the Technician display, touch Adjustments.
2. Touch Core temp offset.
3. Slide your finger up or down to select the preferred offset. You can
adjust the temperature by 1°C increments which are equal to 1.8⁰F at a
time.
Adjust the sous vide temperature
1. On the Technician display, touch Adjustments.
2. Touch Core temp sous vide offset.
3. Slide your finger up or down to select the preferred offset. You can
adjust the temperature by 1°C increments which are equal to 1.8⁰F at a
time.
SERVICE MANUAL 29
To Next Page
Loading...
Need help?
General
