Settings on the Technician Menu
Testing the Alarm
This function tests the thermo-switch circuit.
5. On the Technician display, touch Test functions, and then touch Main alarm.
6. Touch Main contactor. If all status values are displayed in green and the
status is On, it indicates that the alarm is working properly. If a value is
displayed in red and the status is Off, a fault has occurred.
Displays whether the alarm is on or off.
Displays whether the alarm is on or off. (Auto Reset)
Displays whether the alarm is on or off. (Manual Reset)
Displays whether the alarm is on or off. (Manual Reset)
Displays whether the alarm is on or off. (Auto Reset)
Testing the Gas Functions
1. On the Technician display, touch Test functions, and then touch Gas.
2. Touch each button in turn to test the gas functions. Note that BLCT-202
models have both a Heater 1 and a Heater 2 button.
Displays the current oven temperature.
Displays whether the gas valve is Off or On.
Displays whether the pressure switch is Off or On.
Displays the specified rpm value
Displays the fan revolutions per minute.
SERVICE MANUAL 25
To Next Page
Loading...
Need help?
General
