Blodgett BLCT-61G User Manual

Troubleshooting
Gas Error Codes
The following error codes are gas oven specific.
Error 50/60
Pressure switch error. The pressure switch is active at start (timeout 20 sec.)
Steps
Check list
Solution
1
Go to the test menu, and adjust the
Change the pressure switch.
pressure switch. (See Appendix D:
Touch controller “XPE” – Set-up and
Adjustment on page 59).
Verify that it the pressure switch is
working properly.
Error 51/61
Pressure switch error. The pressure switch is not active when the gas fan is running.
Steps
Check list
Solution
1 Go to test function.
Check that the relay K16 is
working properly.
2
Adjust the pressure switch.
Change the pressure switch.
(See Appendix D:
Touch controller “XPE” – Set-up and
Adjustment on page 59).
Verify that it the pressure switch is
working properly.
SERVICE MANUAL 49

Blodgett BLCT-61G Specifications

General

Brand	Blodgett
Model	BLCT-61G
Category	Oven
Language	English