Operation
20
CH-Pro3 (Solid State Programmable Digital Control)
PRO GRA MMIN G THE MANUAL KEY DEFAULT
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press t he MANUAL KEY (12). The manual and
fan key LEDs light.
3. Press t he PROGRAM KEY (14).
4. Press the TIME A RROW KEYS (3) to enter the
cook time.
5. PresstheTEMPERATUREARROWKEYS(7)
to enter t he cook temperature.
6. For Cook and Hold --- Press and hold the
HOLD KEY (8). At the same time use the TEM-
PERATURE ARROW KEYS (7) to enter t he
hold temperature. The hold key LED lights.
For Cook with Pulse --- P r e s s t h e FA N K E Y
(10). Use the TIME ARROW KEYS (3) to enter
the pulse time. The fan key LED flashes.
7. Press the PROGRAM KEY (14) to save the pro-
gram settings.
MANUAL KEY DEF A ULT OPERATION
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press the MANUAL KE Y (12). The a pplicable
LEDs light.
3. Press the START KEY (13). The TIME DISPLAY
(2) counts down. The manual key LED flashes.
NOTE: InCookwithPulsethefanLEDflashes.
NOTE: Press the arrow keys to change the
cook time and temperature at any
point during manual key operation.
4. When the cook time expires the applicable
LEDs and both displays flash and an audible
alarm s ounds.
5. Press the STOP KEY (15) to silence the alarm.
NOTE: In Cook & Hold the alarm self cancels.
The oven cools to the hold tempera-
ture and the time display counts up.
6. Remove th e product.
7. Turn the SELECTOR SWITCH (1) to OFF to
shut down the oven.
PROGRAMMING THE PRODUCT KEYS
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press the desired PRODUCT KE Y (11). The
product and fan key LEDs light.
3. Press and hold the PROGRAM KEY (14) until
the corresponding LED flashes, approximate-
ly five seconds.
4. Press the TIME A RROW KEYS (3) to enter the
cook time.
5. PresstheTEMPERATUREARROWKEYS(7)
to enter t he cook temperature.
6. For Cook and Hold --- Press and hold the
HOLD KEY (8). At the same time use the TEM-
PERATURE ARROW KEYS (7) to enter t he
hold temperature. The hold key LED lights.
For Cook with Pulse --- P r e s s t h e FA N K E Y
(10). Use the TIME ARROW KEYS (3) to enter
the pulse time. The fan key LED flashes.
7. Press the PROGRAM KEY (14) to save the pro-
gram settings.
PRODUCT KEY OPERATION
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press the desired PRODUCT KE Y (11). The
applicable LEDs light.
3. Press the START KEY (13). The TIME DISPLAY
(2) counts down. The product key LED flashes.
NOTE: InCookwithPulsethefanLEDflashes.
4. When the cook or pulse time expires the appli-
cable LEDs and both displays flash and an au-
dible alarm sounds.
5. Press the STOP KEY (15) to silence the alarm.
NOTE: In Cook and Hold the alarm self can-
cels. The oven cools to the hold tem-
perature and the time display counts
up.
6. Remove th e product.
7. Turn the SELECTOR SWITCH (1) to OFF to
shut down the oven.