31
AT6020
Coulter Blades
• 3”-4” Deep (make sure hub is not running in the ground)
• If blades are new or being used for the rst time in a season,
or if residue is hair pinning, sharpening each blade will assist
in cutting during the rst few acres of operation. After the rst
few acres, blades will self-sharpen
Residue Managers – Light pressure setting (particularly in light soils)
Shank depth – Minimum 4” deep from ground level (optimum
depth for fertilizer placement is 6”-8”)
Sealer Blade Position – Front holes on the sealer arm
Sealer Blade Pitch – Determined by soil type and season in this residue
Sealer Blade Down Pressure – Determined by soil type and season in
this residue
Basket Pressure – Determined by soil type and season in this residue
Sugar
Beets
Operational Guide For Various Residue Situations
BLU-JET StripTill Implement
Residue Managers
Sealers
Torsion
Basket
Light Pressure
Setting
Front holes
Front holes
Left-hand
Right-hand
Front holes
NOTE:
Left-hand
and
right-hand
as viewed
from the rear
To Next Page
Loading...
