The motor propels the vehicle in forward or reverse
direction. The vehicle can be driven with the platform
raised or lowered; however the speed is restricted
above 20”.
On demand power steering makes the vehicle highly
maneuverable.
The control arms are used to operate the work vehicle
and provide operator safety.
The pick tray is used to place and transport merchan-
dise, equipment and tools.
The operator platform contains the “Deadman”
footswitch which must be depressed for the vehicle to
operate.
1-3. DATA PLATE AND WARNING DECAL.
Warning decals are located on the mast cover. The
name plate is mounted on the center of the mast
cover.
If the data plate or warning decals are lost or damaged
they MUST be replaced immediately. Have your
supervisor or the designated authority contact Blue
Giant Authorized Dealer for replacement.
The data plate shows the model, serial number,
capacity, lift height, vehicle weight and minimum
battery weight. See Figure 1-3.
1-4. INSTALLATION / WARRANTY CHECK LIST.
The Blue Giant Installation and Warranty Registra-
tion Reports are used to initiate
the start of the war-
ranty period to the original end user.
This report also serves as documentation that all items
on the Installation and Warranty Registration Report
were reviewed and discussed with the end user prior
to taking receipt of the equipment.
This report must be completed and returned to Blue
Giant within fifteen (15) days of receipt of
equipment.
Figure 1-3 BG Zero Data Plate
R8522
To Next Page
Loading...