EasyManua.ls Logo

bluelab Guardian Monitor - User Manual

bluelab Guardian Monitor
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
English
Instruction Manual
Version 1 / 120809_bl
©Copyright 2009, all rights reserved, Bluelab Corporation Limited

Table of Contents

Other manuals for bluelab Guardian Monitor

Preview: Care And Use Guide
Care And Use Guide18 pages

Questions and Answers

bluelab Guardian Monitor Specifications

General IconGeneral
Measurement ParameterspH, Temperature, Conductivity
pH Range0.0 to 14.0
pH Accuracy±0.1
Temperature Accuracy±0.5 °C
Temperature Resolution0.1 °C
Conductivity Resolution0.01 mS/cm
Display TypeLCD
ATCYes
Operating Environment0 to 50 °C
pH Resolution0.1 pH

Summary

pH Probe Care and Maintenance

Initial Setup Procedures

Mounting the Monitor

Detailed steps for mounting the Bluelab Guardian Monitor, including wall or support options.

Install Correct Plug Adaptor

Guidance on selecting and attaching the appropriate power plug adaptor for your region.

Connect Power and pH Probe

Instructions for connecting the power adaptor and the pH probe to the monitor unit.

Power Up the Monitor

Steps to turn on the Bluelab Guardian Monitor and initiate its display test sequence.

pH Calibration Procedure

pH Calibration Steps

Detailed step-by-step guide for calibrating the pH probe using buffer solutions.

Probe Placement and Alarm Settings

Placement of Probes

Setting Alarms (Quick-set)

Setting Alarms (Detailed)

Troubleshooting Guide

Related product manuals