JUST POWER ON 15
Danger
1.5 Maintenance Requirements
The equipment generates high voltage during operation, which can
cause electric shock leading to severe injury, property damage, or
even death. Please strictly follow the safety instructions provided in
the user manual and adhere to relevant electrical safety codes.
To ensure your safety while maintaining the system, please follow the following steps:
Step1: Disconnect the power grid.
Step2: Disconnect the battery and solar systems.
Step3: Wait at least 30 minutes until the equipment is discharged.
• Follow the anti-static requirements to prevent electric shock and other potential
hazards.
• For any maintenance needs, please contact your local authorized service center.
• Place temporary warning signs or erect fences to prevent unauthorized access to
the maintenance site.
• To ensure personal safety and proper equipment usage, establish a reliable
grounding connection before use.
• Wear personal protective equipment (PPE) during operation. If there is a possibility
of personal injury or equipment damage, stop operation immediately, and take
appropriate protective measures.
• Use tools correctly to avoid injury or damage to equipment.
• Do not touch energized equipment.
• Do not clean the electrical components inside and outside the cabinet with water.
• Do not stand, lean on or sit on top of the equipment.
• Do not damage the equipment modules.
• When the battery fails, avoid touching the battery and be careful of high temperature.
• Do not disassemble or damage the battery. The released electrolyte is harmful to
your skin and eyes. Avoid contact with electrolyte.
• Batteries can cause electric shock and high short-circuit current. When using
batteries, please note the following:
(a)Remove any metal objects, such as watches and rings, from yourself.
(b)Use tools with insulated handles.
(c)Wear rubber gloves and boots.
To Next Page
Loading...
