2.2. Working Mode
The EP760 ESS offers four operating modes to accommodate various energy plans.
You can choose the one that best suits your home power supply configuration.
• Mode 1
If there is already a grid-connected PV system, combine it with the EP760 ESS by
means of AC coupling. This setup prioritizes PV power for the load, charges the
batteries with excess power, and feeds surplus energy back to the grid.
Table 2-1
Item Description
EP760 Inverter
Anenergy storage photovoltaic grid-connected inverter to handle
photovoltaic input, grid-connected charging, and discharging.
B500 Battery LiFePO4 battery pack to power the EP760 system.
IoT Controller
A component to facilitate seamless near-end communication
(Bluetooth) or remote communication (WiFi) with the EP760 inverter.
BLUETTI App An application to monitor and control the EP760 ESS.
CT
(Current Transformers)
Components to contribute to intelligent operation management
within the EP760 system.
Rapid Shutdown
A component to disconnect the DC input from the solar system
and the AC input from the grid.
Figure 2-2
Solar panels
BLUETTI APP
EP760
B500
Grid
Green Energy
Public Grid Energy
Hybrid Energy
AC loads
JUST POWER ON
19
To Next Page
Loading...
