EasyManua.ls Logo

Bluetti EP760 - Environment, Location, and Space Requirements

Bluetti EP760
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JUST POWER ON44
22
Vacuum cleaner
6.3 Installation Requirements
6.3.1 Environment Requirements
Install the EP760 ESS in a well-ventilated and spacious area to ensure good heat
dissipation.
The EP760 ESS has an IP65 rating and can be installed indoors and outdoors.
Please note that if you place the system outside the house, use a cabinet to protect
it from direct sunlight, as this may cause a degradation in system performance.
The enclosure and heat sink are very hot while the inverter is working, therefore do
NOT install the inverter in places where you might touch inadvertently.
Keep the EP760 ESS away from flammable liquids, gases, or explosive materials.
Keep away from children and pets.
Do not install the EP760 ESS outdoors in salt-affected areas, as the accumulation of
salt may corrode the system. Salt-affected areas are those within 500 meters from
the coast or susceptible to sea breezes. Salt accumulation is influenced by seawa-
ter, sea breeze, precipitation, air humidity, topography and forest cover of adjacent
sea areas.
Do not install the system in low-lying areas where water tends to accumulate.
Otherwise, water may leak into the equipment and result in system failure.
Ambient temperature range: -20℃~40
Relative humidity: 5%95% (non-condensing)
Maximum height: 2000m.

Related product manuals