Generalities
17
Speedmachine Owners Manual
General notes about assembly
Tools
Bike specific tools are required to perform the installation of your Speedmachine and
its components. We recommend that you have a qualified bicycle mechanic to correct-
ly install these components.
Before you start assembling, make sure you are equipped with the following tools:
Allen keys:
• 2.5, 3, 4, 5, 6 mm
Flat wrench:
• 11mm
Torque wrench and bits
• Hex 2.5, 3, 4, 5, 6 mm
• Torx T25
Special tools
• Carbon saw blade Park Tool CSB-1.
• Park Tool IR-1.2 Internal Cable Routing Kit
Grease compounds:
• Grease gun or grease brush
• Fine assembly grease
• Friction paste
• LOCTITE® 243 Blue
Operator protections:
• Eye protection
• Hands protection
Repair stand
WARNING: Clamping the frame or its components into a bike repair stand could
damage its structure or finish.
WARNING: Never clamp the frame by the top tube, downtube or seat tube.
Please prefer a traditional fork mount stand like the Park Tool PRS-22.2 Team Issue
Repair Stand.
To Next Page
Loading...
Need help?
General