BMW iX - Page 145

Drive mode for increased agility of the vehi‐
cle.
Individual settings can be entered, for exam‐
ple, for driving dynamics, suspension and
drivetrain.
"SPORT PLUS": with this setting under driv‐
ing dynamics, the Dynamic Stability Control
and thereby the driving stability will be restric‐
ted.
▷ Dynamic Stability Control, see page 223
▷ Setting for increased driving dynamics,
see page 224.
▷ "Efficient Mode":
Drive mode for a consumption optimised set‐
ting with predictive display.
Efficiency Coach, see page 320.
Selecting the drive mode
1.
Press the button.
2. "Switch mode"
3. Select the desired drive mode.
Setting the drive mode
Some driving modes can be set individually.
1.
Press the button.
2. Select the drive mode.
3. "Settings"
4. Make the desired settings.
Parking brake
Principle
The parking brake is used to prevent the vehicle
from rolling when it is parked.
Safety notes
WARNING
An unsecured vehicle can start moving and roll‐
ing away. There is a risk of accident. Before
leaving the vehicle, secure it to prevent it from
rolling away.
Observe the following to ensure that the vehi‐
cle is secured against rolling away:
▷ Apply the parking brake.
▷ Turn the front wheels towards the kerb on
upward or downward gradients.
▷ Additionally secure the vehicle on upward
or downward gradients, for example with a
chock.
WARNING
Unsupervised children or pets in the vehicle
can set the vehicle in motion and endanger
themselves or other road users, for example by
the following actions:
▷ Pressing the Start/Stop button.
▷ Releasing the parking brake.
▷ Opening and closing doors or windows.
▷ Engaging selector lever position N.
▷ Operating vehicle equipment.
There is a risk of accident or injury. Do not
leave children or pets unsupervised in the vehi‐
cle. When leaving the vehicle, take the vehicle
key with you and lock the vehicle.
Seite 145
Driving
CONTROLS
145
Online Edition for Part no. 01405A38CB9 - VI/21