Setting the sensitivity of the rain sensor
Turn the knurled wheel to set the sensitivity of
the rain sensor.
Upwards: high sensitivity of the rain sensor.
Downwards: low sensitivity of the rain sensor.
Window washer system
Safety notes
WARNING
At low temperatures, the washer fluid can
freeze onto the windscreen and restrict visibil‐
ity. There is a risk of accident. Only use the
washer systems if there is no possibility of the
washer fluid freezing. Use antifreeze if required.
NOTE
If the washer fluid reservoir is empty, the
washer pump cannot operate as intended.
There is a risk of material damage. Do not use
the washer system with the washer fluid reser‐
voir empty.
Cleaning the windscreen
Pull the lever.
The washer fluid is sprayed onto the windscreen
directly in front of the wiper blade when the wip‐
ers move up and down.
Windscreen washer jets
The windscreen washer jets are automatically
heated when standby state is switched on.
Rear wiper
Switching on rear window wiper
Turn the outer switch upwards.
▷ Park position of the wiper, position 0.
▷ Intermittent mode, arrow 1. Engaging reverse
gear activates continuous operation.
Cleaning the rear window
Turn the outer switch in the desired direction.
Seite 151
Driving
CONTROLS
151
Online Edition for Part no. 01405A38CB9 - VI/21