BMW iX - Page 194

Warning function for oncoming
traffic
Principle
The system can issue a warning of a possible
risk of collision with oncoming vehicles and acti‐
vate the brakes independently, if needed.
In the event of a collision, the system can help
reduce impact speed.
General
Sensors record the traffic situation.
The system issues a warning of a possible risk of
collision with vehicles at speeds above approx.
5 km/h/3 mph. The timing of these warnings may
vary depending on the current driving situation.
For further information:
Front-collision warning, see page 189.
Safety notes
Follow the Safety Information in Chapter “Front-
collision warning”.
Display in the instrument cluster
A warning symbol is displayed when a collision
with a detected vehicle is imminent.
Icon Meaning
Oncoming traffic warning when a vehi‐
cle is detected.
General risk of collision.
Warning function
The warning prompts the driver to intervene per‐
sonally.
In case of a risk of collision, a brake intervention
is triggered.
For further information:
Front-collision warning, see page 189.
System limits
General
The system limits and functional limitations of
the Front-collision warning apply.
Safety note
WARNING
The system may not respond at all, or may re‐
spond too late, incorrectly or without justifica‐
tion due to system limitations. There is a risk of
accident or material damage. Observe the in‐
formation on the system limits and intervene
actively if necessary.
Seite 194
CONTROLS
Safety
194
Online Edition for Part no. 01405A38CB9 - VI/21