BMW iX - Page 195

Detection range
The detection capability of the system is limited.
Only objects within the detection range and that
are detected by the system are taken into ac‐
count.
For example the following might not be detected:
▷ Oncoming vehicles at a very high speed.
▷ Vehicles with an unusual front view.
Warning function for turning
with oncoming traffic
Principle
There is a risk of an accident with oncoming ve‐
hicles when turning across the oncoming lane.
The system may prevent such accidents. If an
accident cannot be avoided, the system helps to
reduce the collision speed.
The system can issue a warning of a possible
risk of collision and may activate the brakes inde‐
pendently.
General
Sensors record the traffic situation.
The system issues a warning of a possible risk of
collision with oncoming vehicles at speeds from
approx. 5 km/h/3 mph. The timing of these warn‐
ings may vary depending on the current driving
situation.
For further information:
Front-collision warning, see page 189.
Safety notes
Follow the Safety Information in Chapter “Front-
collision warning”.
Display in the instrument cluster
A warning symbol is displayed when a collision
with a detected vehicle is imminent.
Icon Meaning
Oncoming traffic warning when a vehi‐
cle is detected.
General risk of collision.
Warning function
The warning prompts the driver to intervene per‐
sonally.
For further information:
Front-collision warning, see page 189.
Seite 195
Safety
CONTROLS
195
Online Edition for Part no. 01405A38CB9 - VI/21