n
“Rack” models must be mounted in a slide-in unit for 19” cabinets or
racks. These components will provide mechanical, electrical and fire
protection (only the front panel may remain accessible).
n
IMPORTANT: before any installation, refer to the “technical
characteristics” paragraph.
n
Caution :
n
In case of replacement of the CR2032
battery, it is IMPERATIVE to respect the
polarity following the opposite
indications.
n
There is risk of explosion if the battery is
replaced by a battery of incorrect type.
n
Dispose of used batteries according to
the instructions of the manufacturer.
5
-
+
To Next Page
Loading...
