14
P063GUI001 - User guide eCelsius Performance Connect.1 - EN
The ePerf Mobile Application may be installed on an Android smartphone or tablet (cf. § ePerf Mobile
installation page 14).
The application is used to:
* Set the ePerf Connect device (Time, Information, Canal etc...)
* Guide the user in the activation process, deactivation process and pause mode
* Collect the real time temperature data and synchronize the data available in the ePerf
Connect memory
* Display the data in real time (numerically or graphically)
* Store, Display or export the data collected or from old capsules
e-PERF MOBILE APPLICATION
4. OPERATING PRINCIPLES
TURN ON ePerf Connect
ePerf Connect device is provided turn off. To turn on the device, please make a long pression on the button
1 (on the side of the device - BodyCAP side). This process turn on the screen of the device. If the screen
does not turn on, connect the ePerf Connect device to a power source and try again few minutes later.
A LED conrms the pression on the button.
Before use of the ePerf Connect on battery mode, please ensure that the charge level is sucient. A symbol
on the screen of the ePerf Connect device indicates the level of battery.
BATTERY CHARGING
If you intend to use the ePerf Connect device on battery mode, please ensure that the charge level is
sucient. The USB Cable compatible with the device allows to charge the internal battery when it is
connected to a power source (main outlet or laptop switch on). The ePerf Connect device charge even if it
is turn off.
The ePerf Mobile Application allows to retrieve and to display the data collected by the eCelsius Perfor-
mance Connect system. To do so, please use an Android device with this minimal conguration:
- Android 8 or superior
- Bluetooth Low Energy 4.x or 5.x
- Play Store access
- 100Mo available for installation of the application
FIRST USE
ePerf Connect DEVICE IMPLEMENTATION
ePerf Mobile INSTALLATION
To Next Page
Loading...