8
TFTP Server from DHCP “Yes” means the device will use the DHCP option 66
value to retrieve an address for the TFTP Server from
DHCP.
“No” means the device will ignore the DHCP option
66
value and use the manually configured value of
the TFTP Server (see above).
Note: This setting is not available when Standalone
Op
eration is enabled.
DHCP Enabled Indicates if the device is enabled to use DHCP to
re
trieve its IP configuration.
Reboot Appliance Indicates that this appliance should reboot when the
Sa
ve button is clicked.
Table 4, Network Settings (Continued)
To Next Page
Loading...
Need help?
General
