12
Table 6. Configuration Settings (Standalone enabled)
Device Type Displays the type of this device.
Device Name Provide a name for this device.
Web Username Provide a web username for this appliance.
Web Password Provide a web password for logging into the appliance.
Web Confirm Password Re-enter the password used to log into the appliance.
Time Zone Select the time zone in which the device resides.
Prioritize Line Input If a channel simultaneously receives input signals from
b
o
th a network input and a line input, “Yes” means the line
input is used, “No” means the network input is used.
Yes or No
Channel A/B Load
Im
pedance
Specify the impedance load of the connected speaker(s).
Low (typically 4–16 ohms) or High (typically 1000+ ohms)
Channel A/B Output
P
o
wer
Controls the output power to the speaker.
This can be a value from -6 to +6 dB.
Enable SIP Calls Enables this device to receive one-way SIP calls, wherein
o
n
ly the caller can be heard (such as announcements). If
enabled, a number of SIP-related configuration settings
are displayed.
Yes or No
SIP Server Address
a
Specify the IP address of the SIP Registration Server with
which the device will register.
SIP Network Port
a
Specify the IP port on which to communicate with the SIP
Registration Server (typically 5060).
SIP Codecs
a
Displays a read-only list of codecs allowed on SIP sessions.
SIP Extension
a
(Channel A/B)
Specify the SIP extension corresponding to Channel A or B.
The extension, along with the IP address, is used to specify
th
e URI used to place a SIP call to this extension:
sip:<extension>@<local_ip_address>
SIP User Name
a
(Channel A/B)
Specify the SIP user name used to register Channel A or B
with the SIP server.
To Next Page
Loading...
