13
The following parameters appear for each Multicast Address configured for this device.
SIP Password
a
(Channel A/B)
Specify the SIP registration password used to register
Ch
annel A or B with the SIP server.
Cut Level
a
(Channel A/B)
Specify the intercom volume to be used for SIP calls over
Ch
annel A or B.
This can be a value from -42 and 0 dB.
The default value is -20 dB.
Note: To modify, click on the value, adjust the slider on the
po
pup using the cursor keys or mouse, and click the check
box button.
a. Available only when Enable SIP Calls has a value of Yes.
Multicast IP Address Specifies the multicast IP address on which to receive
audio streams.
Multicast Port Number Specifies the multicast port on which to receive audio
st
reams.
Table 6. Configuration Settings (Standalone enabled)
To Next Page
Loading...
Need help?
General
