Need help?Do you have a question about the BONFIGLIOLI ACTIVE Cube ACU 401-45 and is the answer not in the manual?
General| Brand | BONFIGLIOLI |
|---|---|
| Model | ACTIVE Cube ACU 401-45 |
| Category | Inverter |
| Language | English |
Instructs users to comply with and not remove safety information and danger warnings provided on the inverter.
Explains hazard classes (DANGER, WARNING, CAUTION, NOTE) and symbols used for important safety information.
Outlines responsibilities for staff selection, qualification, and general work safety when handling the frequency inverter.
Provides safety instructions for the STO function, emphasizing proper installation and qualification by staff.
Presents detailed technical data for ACU 201 frequency inverters rated from 0.25 to 1.1 kW at 230 V.
Provides technical specifications for ACU 201 frequency inverters in the 1.5 to 3.0 kW range at 230 V.
Lists technical data for ACU 201 frequency inverters covering the 4.0 to 9.2 kW power range at 230 V.
Details technical specifications for ACU 401 frequency inverters from 0.25 to 1.5 kW at 400 V.
Provides technical data for ACU 401 frequency inverters in the 1.85 to 4.0 kW power range at 400 V.
Lists technical specifications for ACU 401 frequency inverters from 5.5 to 15.0 kW at 400 V.
Details technical data for ACU 401 frequency inverters in the 18.5 to 30.0 kW range at 400 V.
Presents technical specifications for ACU 401 frequency inverters covering 37.0 to 65.0 kW at 400 V.
Lists technical data for ACU 401 frequency inverters in the 75.0 to 132.0 kW range at 400 V.
Describes standard installation dimensions and mounting for ACU 201 and 401 inverters up to 3.0/4.0 kW.
Details standard installation dimensions and mounting for ACU 201 (4.0-9.2 kW) and 401 (5.5-15.0 kW) inverters.
Provides standard installation dimensions and mounting information for ACU 401 inverters from 18.5 to 30.0 kW.
Describes standard installation dimensions and mounting for ACU 401 inverters in the 37.0 to 65.0 kW power range.
Details standard installation dimensions and mounting for ACU 401 inverters from 75.0 to 132.0 kW.
Covers dimensioning of conductor cross-sections and typical cross-sections for mains and motor connections.
Illustrates mains and motor connection diagrams for ACU 201 and 401 series inverters across different power ratings.
Describes control terminals and their functions, including wiring guidelines and parameter settings for configurations.
Details how to display and navigate through various actual values of the frequency inverter using the control unit.
Explains how to display, edit, and adjust parameter values within the control unit's parameter menu.
Describes the function for copying parameter values between the control unit and the frequency inverter.
Explains how to transmit parameter values from the control unit to the frequency inverter or vice versa.
Details functions available in the CTRL menu for easier commissioning and direct control of the inverter.
Explains how to control the connected motor's speed and direction using the control unit and digital inputs.
Provides crucial safety checks before switching on mains voltage to the frequency inverter.
Guides the user through the guided commissioning procedure for parameter setup and application.
Details the procedure for checking and correcting the motor's direction of rotation after installation.
Explains how to connect and configure speed sensors (incremental, encoders) for speed control.
Describes parameter setting and commissioning using optional communication interfaces.
Details how Configuration 30 determines control input/output assignments and software functions.
Instructs on setting rated motor parameters from the rating plate for control functions and methods.
Details the connection and configuration of speed sensor 1 for control functions and methods.
Explains sensor evaluation accuracy levels (single, double, quadruple) for TTL and HTL sensors.
To Next Page
