What to do if storage tank pump does not work in Bongioanni Boiler?
If the storage tank pump isn't working, first check the pump and the electrical connection between the pump and the control panel, as the pump might be blocked or the connections faulty. Also, verify the efficiency and position of the storage tank thermostat.
What to do if the safety valve of Bongioanni Multidea Evo 60 Boiler activates frequently?
If the system safety valve is frequently intervening, it could be due to several reasons: * The system safety valve itself might need checking for its setting or efficiency. * The system pressure might be off, so check the filling pressure, pressure reducer, and filling valve. * The system expansion vessel's efficiency could also be a factor; check its condition.
What to do if my Bongioanni Boiler reaches temperature but heating is cool?
If your heating systems are cool even though the generator reaches the set temperature, it could be due to: * Air in the system: Purge the system to remove trapped air. * System pump: Check if the pump is blocked and unblock it, or replace the pump if necessary.
Why won't the system pump work in my Bongioanni Boiler?
If the system pump isn't working, the cause may be a blocked pump or issues with electrical connections. Check the pump and its connections. Another potential reason is the room thermostat. Inspect the room thermostat and its connections.
Why Bongioanni Boiler does not reach set temperature?
If the generator isn't reaching the set temperature, it could be because the generator heat exchanger is dirty. Clean the combustion chamber. Alternatively, the burner flow rate might be insufficient, so check the burner settings.
Why does my Bongioanni Multidea Evo 60 Boiler smell of uncombusted fuel?
If you notice a smell of uncombusted fuel, the issue likely lies within the flue circuit. Check the sealing of joints, look for any obstructions, and assess the combustion quality.
How to fix irregular combustion in Bongioanni Boiler?
Irregular combustion can stem from several factors. You should check the supply gas pressure settings. Also check the conditions of burner and/or if the exchanger is dirty. Intake and/or exhaust lines should also be checked for their conditions.
Why is there delayed ignition with pulsing on burner in Bongioanni Multidea Evo 60 Boiler?
Delayed ignition with pulsing on the burner suggests that more precise tuning of ignition power is required. Modify the settings to address this.
General| Type | Condensing Boiler |
|---|---|
| Fuel Type | Natural Gas |
| Heat Output (kW) | 60 |
| NOx Class | 5 |
| Hot Water Production | Yes |
| Heating Capacity | 60 kW |
| Operating Pressure | 3 bar |
To Next Page
