≥ 100 mm
eco
esc
menu
ok
Lunedi, 24. Settembre 2012
09.37
HANDLING
After removing the packaging, the appliance can be
handled manually by tilting it and lifting it from the points
indicated in the figure.
b Never use the boiler casing as a lifting point;
always use "solid" parts such as the base or
rear structure.
b ALWAYS use suitable accident protection equip-
ment.
a It is strictly prohibited to dispose of packaging into
the environment or leave in the reach of children as
this constitutes a potential source of danger. It must
therefore be disposed of in accordance with current
legislation in the place of use.
INSTALLATION ROOM
The installation room must always comply with current
technical standards and legislation in the country of use.
The room must be fitted with suitably sized ventilation
outlets in the case of "TYPE B23P" installations.
The installation room must exclusively be for this
purpose and comply with current technical standards and
legislation in the country of use.
MULTIDEA EVO appliances may also be installed
outdoors, under a canopy, i.e. with adequate protection
from atmospheric agents.
INDICATIVE SAFETY ZONES
b
WARNINGS
•
Take into account the clearances required for
accessibility to the safety/adjustment devices and for
maintenance purposes.
INAIL safety components and Hydraulic Separator
(available as accessories)
- 16 -
To Next Page
Loading...
