Bonnet Equator 6 Series User Manual

Page 18 3BE390691NM – 10/10
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
- Open the door and measure the distance between the top of the door and the tip of the closing piston.
- Measure the distance between the top of the oven and the bottom of the hook groove.
Distance between the top and the piston tip Distance between the top and the groove bottom
- The distance between the top of the oven and the closing hook must be 1 to 2 mm greater than the
distance between the top of the door and the piston tip. If not, loosen the closing hook screw and adjust
the distance.
7.2 20 LEVEL OVENS
- Make sure that the oven is properly secured to the floor. Level the oven.
- Door closed. Level the door by loosening both fixations screws of the upper hinge on the oven.
Screws

Bonnet Equator 6 Series Specifications

General

Brand	Bonnet
Model	Equator 6 Series
Category	Oven
Language	English