bora Classic 2.0 - Energy Labelling Information; Energy Consumption and Efficiency; Flow Volume and Lighting; Grease Filtering, Noise, and Power Consumption

EN
10
Energy labelling
www.bora.com
3 Energy labelling
Product information according to delegated regulation (EU) no. 65/2014 and regulation (EU) no. 66/2014.
Manufacturer
Model identification
BORA
CKA2
Symbol Value Unit
Energy consumption
Annual energy consumption AEC
hood
28.0 kWh/a
Energy efficiency class – A+ –
Energy efficiency index EEI
hood
37.0 –
Flow volume
Fluid dynamic efficiency FDE
hood
36.3 –
Fluid dynamic efficiency class – A –
Minimum air flow in normal use – 239 m³/h
Maximum air flow in normal use – 559 m³/h
Maximum air flow on intensive or boost setting (power setting) Q
max
591 m³/h
Measured air flow rate at best efficiency point Q
BEP
282.3 m³/h
Measured air pressure at best efficiency point P
BEP
508 Pa
Measured electric power input at best efficiency point W
BEP
109.7 W
Time increase factor f 0.7 –
Lighting
Lighting efficiency LE
hood
* lx/W
Lighting efficiency class – * –
Nominal power of the lighting system W
L
* W
Average illumination of the lighting system on the cooking surface E
middle
* lx
Grease filtering
Grease filtering efficiency GFE
hood
97.7 %
Grease filtering efficiency class – A –
Noise
Airborne acoustical A-weighted sound power emissions at minimum speed
available in normal use
– 45 dB(A) re1pW
Airborne acoustical A-weighted sound power emissions at maximum speed
available in normal use
– 65 dB(A) re1pW
Airborne acoustical A-weighted sound power emissions on intensive or boost
setting (power setting)
– 66 dB(A) re1pW
Sound pressure level at minimum speed available in normal use** – 32 LpA in dB re 20 µPa
Sound pressure level at maximum speed available in normal use** – 52 LpA in dB re 20 µPa
Sound pressure level on intensive or boost setting (power setting)** – 53 LpA in dB re 20 µPa
Power consumption
Power consumption in off mode P
o
0.25 W
Power consumption in standby mode P
s
* W
Tab. 3.1 Energy labelling
* Not applicable to this product.
** Voluntary information
The sound pressure level has been determined from a distance of 1 m (distance-dependent level recording)
on the basis of the sound power level established in EN 60704-2-13.