EN
24
Appliance description
www.bora.com
4.4.4 Residual heat indicator
If a cooking or grilling zone is still hot after switching off, there
is a risk of burns or fire. Whilst the hot symbol and
are
displayed (residual heat indicator), you must not touch that
cooking or grilling zone or place any heat-sensitive objects on it.
After a sufficient cooling period (<50 °C) the indicators will go
out.
i
During or after a power cut, the cooktops may still be hot.
In the case of the cooktops CKCH, CKCB and CKG, no
residual heat is displayed after a power cut, even if they
were in use beforehand and the hobs are still hot.
4.4.5 Overheating protection
i
If a cooktop overheats, its power is reduced or it is
switched off completely.
i
If the operating panel overheats, cooktops or the whole
system may be switched off.
The appliances are fitted with overheating protection.
The overheating protection can be triggered if...
XO
... cookware is heated up empty.
XO
... oil or fat is heated on high power.
XO
... a hot cooking zone is switched on again after a power cut.
XO
... hot cookware heats up the operating panel.
Whilst the overheating protection is active, one of the following
steps is taken:
XO
The activated power setting is switched back to the previous
level.
XO
The set power level is reduced.
XO
The cooking zone switches off completely.
XO
The cooktop switches off completely.
XO
The system switches off completely.
After a sufficient cooling period, the appliance can be used
again in full.
4.4.6 Childproofing feature
The childproofing feature prevents the appliance from being
switched on accidentally or without permission.
To Next Page
Loading...
Need help?
General
