BORETTI BIKP-78 - Pan Detection; Residual Heat Indication

D
EN
27
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
•Ifthereisnopanontheheatingzoneorifthispanisnotadaptedtotheinduction.Inthiscase
it is impossible to increase the power and the display shows [ U ]. This symbol disappears when
a pan is put on the heating zone.
•Ifthepanisremovedfromtheheatingzonetheoperationisstopped.Thedisplayshows[U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues
with the power level set before.
After use, switch the heat element off : don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heatsensitiveobjectonthem.There are risks of burn and fire.
Booster function
The Booster function [ P ] and the Double Booster [
] grants a boost of Booster to the se-
lected heating zone.
Ifthisfunctionisactivatedtheheatingzonesworkduring10minuteswithanultrahighBooster.
Boosterisforeseenforexampletoheatuprapidlybigquantitiesofwater,likenuddles.
•Startup/Stoptheboosterfunction:
Action Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the Booster Press key [ P ] [ P ]
 StoptheBooster Slideonthe“SLIDER“ [9]to[0]
•Startup/Stopthedoubleboosterfunction:
Action Control panel Display
Selection of the zone Press key [ 0 ] [ 0 ]
Start up Booster Press key [ P ] [ P ]
 StartupDoubleBooster Re-presskey[P] [
and P ]
Stop the Double Booster Press key [ P ] [ P ]
 StopBooster Slideonthe“SLIDER“ [9]to[0]