Safety instructions 15/68
RE 92003-01-B/12.2015, A4VG Series 32, Bosch Rexroth AG
CAUTION
Escaping hydraulic fluid due to machine/system leakage.
Risk of burns and injury from escaping oil jet.
▶ Depressurize the relevant machine/system part and repair the leak.
▶ Never attempt to block or seal the leak or oil jet with a cloth.
Danger from improper handling.
Risk of slipping. Risk of slipping on wet surfaces when climbing on the axial
piston unit.
▶ Never grab or climb onto the axial piston unit.
▶ Check how to safely get on top of the machine.
2.7 Personal protective equipment
Personal protective equipment is the responsibility of the user of the axial piston
unit. Observe the safety regulations and provisions in your country.
All pieces of personal protective equipment must be intact.
To Next Page
Loading...
Need help?
General
