6/68 About this documentation
Bosch Rexroth AG, A4VG Series 32, RE 92003-01-B/12.2015
1.3 Display of information
Standardized safety instructions, symbols, terms and abbreviations are used
throughout this documentation so that you can work quickly and safely with your
product. To give you a better understanding they are explained in the sections below.
1.3.1 Safety instructions
This documentation includes safety instructions in chapter2.6 “Product-specific
safety instructions” on page12 and in chapter3 “General instructions on damage
to property and the product” on page 16 and before a sequence of actions or an
instruction for action involving a risk of personal injury or damage to equipment. The
described danger prevention measures must be observed.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Measures to prevent danger
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if the safety instructions are not complied with
• Precautions: states how the danger can be avoided
To Next Page
Loading...
Need help?
General
