Bosch A4VG A4VG 32 Series User Manual

48/68 Commissioning
Bosch Rexroth AG, A4VG Series 32, RE 92003-01-B/12.2015
8 Commissioning
WARNING
Danger while working in the danger zone of a machine/system.
Danger to life or risk of injury or serious injury.
▶ Pay attention to and eliminate potential sources of danger before operating the
axial piston unit.
▶ Make sure no one is in the danger zone of the machine/system.
▶ The emergency stop button for the machine/system must be within the
operator’s reach.
▶ Always follow the instructions of the machine/system manufacturer during
commissioning.
CAUTION
Commissioning an improperly installed product.
Risk of injury and property damage.
▶ Make sure that all electrical and hydraulic ports are connected or plugged.
▶ Only commission a completely installed, fully functioning product with original
accessories from BoschRexroth.
8.1 Initial commissioning
During all work for commissioning the axial piston unit, observe the general
safety instructions and intended use detailed in chapter2 “Safety instructions”
on page9.
▶ Connect the pressure gauge for the boost pressure, working pressure, case
pressure and suction pressure to the specified measuring points on the axial piston
unit or in the hydraulic system, to check the technical data at first operation.
▶ During the commissioning process, monitor the temperature of the hydraulic fluid
in the reservoir to ensure that it remains within the permissible viscosity limits.

Bosch A4VG A4VG 32 Series Specifications

General

Brand	Bosch
Model	A4VG A4VG 32 Series
Category	Water Pump
Language	English