About this documentation 5/68
RE 92003-01-B/12.2015, A4VG Series 32, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation is valid for the following products:
• Axial piston variable pump A4VG Series 32
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
This documentation contains important information on the safe and appropriate
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston unit.
▶ Read this documentation completely and in particular the chapter2 “Safety
instructions” on page 9 and chapter3 “General instructions on damage to
property and the product” on page 16 before you start work with the axial
piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the order-related technical data for your axial piston variable pump
A4VG Series 32.
– Order confirmation
Installation drawing
Contains the outer dimensions, all connections and the hydraulic circuit diagram
for your axial piston variable pump A4VG Series 32.
Please request the
installation drawing
from your contact at
BoschRexroth.
Installation drawing
Axial piston variable pump A4VG Series 32
Contains the permissible technical data.
92003 Data sheet
Mineral oil-based hydraulic fluids and related hydrocarbons
Describes the requirements for a mineral oil-based hydraulic fluid and related
hydrocarbons for operation with Rexroth hydraulic components, and assists you in
selecting a hydraulic fluid for your hydraulic system.
90220 Data sheet
Environmentally acceptable hydraulic fluids
Describes the requirements on an environmentally friendly hydraulic fluid for
operation with Rexroth hydraulic components and assists you in selecting a
hydraulic fluid for your hydraulic system.
90221 Data sheet
Fire-resistant, water-free hydraulic fluids (HFDU/HFDR)
Describes the requirements on fire-resistant, water-free hydraulic fluids (HFDU/
HFDR) for operation with Rexroth hydraulic components and assists you in
selecting a hydraulic fluid for your hydraulic system.
90222 Data sheet
Fire-resistant, water-containing hydraulic fluids (HFC, HFB, HFAE, HFAS)
Describes the requirements on fire-resistant, water-containing hydraulic fluids
(HFC, HFB, HFAE, HFAS) for operation with Rexroth hydraulic components and
assists you in selecting a hydraulic fluid for your hydraulic system.
90223 Data sheet
Information for the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at
low temperatures.
90300-03-B Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312 Data sheet
To Next Page
Loading...
Need help?
General
