18/68 General instructions on damage to property and the product
Bosch Rexroth AG, A4VG Series 32, RE 92003-01-B/12.2015
NOTICE
Escaping or spilling hydraulic fluid.
Risk of environmental pollution and contamination of ground water.
▶ Always place a collecting pan under the axial piston unit when filling and
draining the hydraulic fluid.
▶ Use an oil binding agent if hydraulic fluid is spilled.
▶ Observe the information in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
Danger from hot components.
Nearby products can get damaged. Components which heat up (e.g., solenoids)
can cause damage to nearby products if they are too close.
▶ When installing the axial piston unit, check the distances to nearby products to
ensure that they are not damaged.
The warranty only applies to the delivered configuration.
The entitlement to warranty cover will be rendered void if the product is incorrectly
installed, commissioned or operated, or if it is used or handled improperly.
To Next Page
Loading...
Need help?
General
