Bosch AMAX panel 4000 - Page 112

Zone Pulse Count Duration
Address 0198 - 0200 Address Default
0 = Disable, 1-999sec = Duration 0198 060
VDS-A
EN=000
Event Record Count per Set/Unset Period
Address 0201 Address Default
3 - 10 0201 10
EN=10
System Tamper Indication In Area
Address 0202
Address Default
0 = Area 1, 1 = All Areas 0202 0
Internal Siren Beep As Indication
Address 0203
Address Default
0=Disable, 1=enabled 0203 0
Battery Check Interval
Address 0204
Address Default
0 = Disabled , 1-15 minutes 0204 15
VDS-A
EN=15
Cross Zone Timer
Address 0205 - 0207
Address Default
001 - 999 sec 0205 - 0207 060
AC Power Supply Fault Report Delay
Address 0208 - 0209
Address Default
99 = Disabled, 00 - 98 minutes 0208 - 0209 60
VDS-A
EN=00-60
Domestic Telephone Number
Address 1618 - 1682
Address Default
Domestic Telephone Number 1 1618 - 1633 15
Domestic Telephone Number 2 1634 - 1649 15
Domestic Telephone Number 3 1650 - 1665 15
112 en | Programming
AMAX panel 4000 / AMAX panel 4000
EN
2013.07 | 03 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH