Bosch AMC2 Series - Unmounting

24 en | Installing
AMC2 Modular
Controller
2018-09 | AMC2-4W_UL | Bosch Access Systems GmbH
4.2 Unmounting
Notice!
To remove the AMC2-4W from a mounting rail, first remove all
pluggable connectors.
Push down the AMC2-4W until the lower edge snaps out of the
mounting rail [1]. Pull the lower end of the AMC2-4W from the
mounting rail [2].
Figure4.2: Unmounting the AMC2 from a mounting rail