A complete connection diagram of the relay output connectors
is shown in Connecting Diagrams, page 48.
Figure 4.14: Recovery diode schematic
1
normally open/
normally closed
1 normally open/
normally closed
2 common 2 common
3 load 3 load
4 diode 4 diode
5 voltage source
Notice!
Risk of damage to equipment
Do not connect externally powered devices in wet mode. This
can damage the AMC2-4WE.
36 en | Installing
AMC2 Wiegand
Extension
2016-11 | AMC2-4WE | Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
