Bosch AVENAR panel 2000 - Fault Message; Calling up Fault Indication; Fault Message on the Panel; Acknowledging a Message

46 pt-BR | Fault message
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
2023-08 | 8.0 | F.01U.378.877
Manual do utilizador
Bosch Sicherheitssysteme GmbH
11 Fault message
This chapter contains information about the following points:
– Calling up fault indication, página 46
– Fault message on the panel, página 46
– Resetting fault message, página 49
– Blocking an element, página 50
11.1 Calling up fault indication
i
Aviso!
If a fire alarm is reported, the system automatically switches to alarm indication. To return to
the fault indication, select Falha on the status bar. In the event of a fire alarm, the display
automatically switches back to the alarm indication after 30 seconds.
To display the fault messages from the alarm indication or any other menu, select the
following on the status bar:
– Falha: A list of all reported fault types and the number of faulty elements are displayed.
– Estado: A list of all current messages, grouped by message type, is displayed. The
number of elements is also given in each case.
To display the fault messages, select the message category you require — in this case,
Fault.
0
Incêndio
0
Controlo
8
Falha
0
Inibido Estad
o
!
Cuidado!
If a message does not have to be reset, it is removed from the display as soon as the fault has
been rectified.
i
Aviso!
If individual elements that are combined with other elements in a group are malfunctioning,
the respective element group is displayed first of all. To display the individual elements,
select the element group you require. See also Displaying individual elements of an element
group, página 48 .
11.2 Fault message on the panel
11.2.1 Acknowledging a message
There are two ways to acknowledge messages:
– Acknowledging all displayed messages: Select Reconhecer.
– Acknowledging an individual message: First select the message and then press
Reconhecer.
Grupos de elementos
Todos os elementos lógicos endereçados são exibidos em uma lista.
Os campos de lista com fundo amarelo indicam mensagens de falha não confirmadas.
Campos da lista sem distinção indicam mensagens de falha confirmadas.