Bosch AVENAR panel 2000 - Resetting fault message

48 pt-BR | Fault message
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
2023-08 | 8.0 | F.01U.378.877
Manual do utilizador
Bosch Sicherheitssysteme GmbH
i
Aviso!
15–30 seconds after the last entry (e.g. after scrolling through the list), the first and oldest
fault message is displayed at the beginning of the list again.
11.2.5 Displaying individual elements of an element group
To display the individual elements in an element group, select the element group you require.
The fault messages of the individual elements are listed.
11.2.6 Information about individual elements
The trouble message contains information about:
– Element category
– Message type
– Element address
– Message number
– Additional information (e.g. the installation location)
Example:
Fault Transmission device 00026- 004
#002 Cafeteria
Element category: Transmission device
Message type: Fault
Element address The following transmission device has caused a fault:
00026 - 004: The fourth transmission device (004) in the 26th
group (00026).
Message number The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
002: The second fault message to be received.
Installation location of the
element
Cafeteria
i
Aviso!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
11.2.7 Displaying additional information
Para exibir mais informações sobre os elementos individuais, selecione a mensagem de falha
desejada.
i
Aviso!
As informações exibidas são inseridas no software de programação FSP-5000-RPS.
As seguintes informações são exibidas:
– Categoria do elemento
– Tipo de mensagem