EasyManua.ls Logo

Bosch CA - Model Nomenclature; Unit Model Identification

Bosch CA
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model Nomenclature | 3CA Model
8733942456(2016/04)CA Model
MODEL NOMENCLATURE
Figure # 1
CA 018- 1 UL C -48 0PER A -XG AMXXXS 7MXX
X
7XXXXSBA
CA Code String Rev Level
Size Channel
009
B - Bosch
012
015 Standard/Special
018 S - Standard
Voltage AIR FILTRATION
0 115/60/1 7 - Cleanable Mesh Filter
1 208-230/60/1
2 265/60/1 Water Flow Control Options
X - None
Cabinet Conguration F - 1/2" FPT ttings
UL - Unit Mounted Controller, Left Hand Water
UR - Unit Mounted Controller, Right Hand Water Controls
RL - Remote Thermostat, Left Hand Water X - Standard
RR - Remote Thermostat, Right Hand Water M - DDC - Multi-Protocol (BacNET, Modbus, N2)
L - DDC - LonWorks
Coax Options
C - Copper Transformer
N - Cupro-Nickel 4 - 40 VA
7 - 75 VA
Cabinet Width
48 - 48" Refrigeration Circuit Options
63 - 63" X - None
XX - N/A S - Straight Cool
Supply Air Conguration General Electrical Options (up to 5 available per unit)
0 - N/A A - EMS relay
B - Blower Monitor R
elay
Fan/Motor Options
C - Compressor Monitor Rela
y
P - Standard PSC E - Pump/valve relay
J - Disconnect Switch
Air Coil M - Wire to 208 V
E - Epoxy Coated O - Outside Air Damper
X - As default for non used electrical codes
Cabinet Construction
R - Standard Cabinet and Sub-base (48") Application
S - No Cabinet, Standard Sub-base G - EXTENDED RANGE w/ SHRADER VALVE (Geothermal)
T - No Cabinet or Sub-base (chassis onl
y
)
Electric Heat
Revision Level X - None
A - Current

Related product manuals