EasyManua.ls Logo

Bosch CE035 - User Manual

Bosch CE035
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation and Maintenance Manual
CE Series Heat Pump
6 720 220 048 (2014/08)
CE025 | CE035 | CE049 | CEO61 | CE071

Questions and Answers

  • D
    Deanna WellsNov 27, 2025
    What to do if my Bosch CE035 Heat Pump is not providing enough cooling or heating?
    • M
      Margaret HendersonNov 27, 2025
      If your Bosch Heat Pump isn't sufficiently cooling or heating, several factors could be responsible. The unit might be undersized, so recalculate heating and cooling loads. Check for air leaks in duct work or around doors and windows. Ensure adequate airflow and replace any dirty filters. The refrigerant charge may be low, which causes inefficient operation. Inspect the compressor for defects; if the discharge is too low and suction pressure is too high, the compressor might need replacing. A defective reversing valve could also be the culprit, creating a bypass of refrigerant. Compare unit operating pressures to the pressure/temperature chart. Check the TXV for restrictions or defects, and replace if necessary. Lastly, the refrigerant system might be contaminated with moisture or nonconde...
  • L
    Lauren RuizDec 1, 2025
    What to do if my Bosch CE035 unit does not run at all?
    • M
      Mr. Richard KnightDec 1, 2025
      If your Bosch Heat Pump isn't running, first ensure the power supply is on and the disconnect is closed. Check and replace any blown fuses or reset the circuit breaker, making sure you are using the correct fuses. If the voltage supply is below the minimum specified on the unit's data plate, contact your local power company. To check the thermostat, set the fan to 'ON'; the fan should run. Set the thermostat to 'COOL' at the lowest temperature; the unit should run in cooling mode. Set the unit to 'HEAT' at the highest temperature; the unit should run in heating mode. If neither the blower nor the compressor runs in all three cases, the thermostat might be miswired or faulty. Verify 24 volts are available on the condensing section's low-voltage terminal strip between 'R' and 'C', 'Y' and 'C...

Summary

CE Series Heat Pump Installation and Maintenance Manual

Model Nomenclature Guide

Initial Inspection and General Description

Installation Procedures

Thermostat Connections

Safety Devices and UPM Controller

UPM Controller Safety Functions

Details on high/low pressure switches, freeze protection, and condensate overflow.

UPM Controller Features and Protection

UPM Fault Indication and Reset

UPM Sequence of Operation

Electric Heater Package Options

Heat Recovery Package Installation

Water Tank Refill and System Start-Up

Sequence of Operation and Applications

System Checkout, Start-Up, and Maintenance

Troubleshooting Overview and UPM LED Codes

Unit Troubleshooting Guide

Common unit problems, their causes, and recommended checks and corrections.

Compressor Diagnostics and Comfort Alert

Heat Recovery Package Troubleshooting

Electronic Thermostat Installation Procedure

Operating Temperatures and Pressures - Cooling

Unit Wiring Diagrams

Bosch CE035 Specifications

General IconGeneral
BrandBosch
ModelCE035
CategoryHeat Pump
LanguageEnglish

Related product manuals