19
Requirements
Host computer running on Linux Kernel version 2.6 or later or Windows 7 or later.
INFO: For support regarding your Linux version, please contact you Linux distributor.
A Python 2.7 environment installed on your host computer.
Ensure that the following modules are installed within your Python 2.7 environment
Serial (use the last version of pyserial: pyserial 3.4 (https://pypi.python.org/pypi/pyserial))
Signal, Config Parser, Csv, Time, Os (in Python installer 2.7.14 included)
Driver
In case you are using Windows 7 or Windows 8, please download and install the CISS driver for Windows.
INFO: The Windows 7 / 8 driver is available at www.bosch-connectivity.com/media-and-downloads/
(CISS Driver Installer Windows).
For more information regarding the installation of the driver for Windows 7 and Windows 8 and for more
details about why it is not needed for Windows 10 and Linux, you find an additional document at:
www.bosch-connectivity.com/media-and-downloads/ (CISS Driver Installer Windows Operating Instructions)
There is no need to install this driver for Windows 10 or Linux environments.
Example Python script
Download the example Python script.
INFO: The example Python script is available at www.bosch-connectivity.com/media-and-downloads/
(CISS Demo Scripts Python)
A user guide for the Python script is available at www.bosch-connectivity.com/media-and-downloads/
(CISS Demo Scripts Python Operating Instructions)
To Next Page
Loading...
