Do you have a question about the Bosch Climate Class 6100i Series and is the answer not in the manual?
Explains signal words like DANGER, WARNING, CAUTION, NOTICE and their meanings.
Provides general safety instructions for installation personnel and emphasizes reading all instructions.
Mentions figures are at the end and models may differ.
States compliance with European and national requirements and the CE marking.
Declares compliance with EU Directive 2014/53/EU for radio equipment.
Lists the items included in the product package.
Introduces details on dimensions and required clearances for units.
Specifies the unit is not for commercial use and limits liability for incorrect use.
Warns about R32 refrigerant, toxic gas generation, and ventilation needs.
Outlines safety requirements for children and damaged power cables per EN 60335-1.
Instructions on explaining operation, safety, maintenance, and handing over manuals.
Details dimensions and clearances for indoor and outdoor units, referencing figures.
Refers to figures for refrigerant line details.
Provides warnings about sharp edges and burns, and checking scope of delivery.
Mentions minimum clearances and snow accumulation issues.
Specifies installation location requirements for the indoor unit.
Specifies installation site requirements for the outdoor unit.
Provides general instructions for unit installation.
Step-by-step guide for mounting the indoor unit.
Details attaching the mounting plate and routing pipes.
Instructions for unpacking and mounting the outdoor unit.
General section on connecting pipes.
Step-by-step guide for connecting refrigerant lines, including flaring.
Instructions for connecting the condensate pipe.
Steps for checking for leaks and filling the system with refrigerant.
General notes on electrical connections.
Safety warnings and general guidelines for electrical work.
Instructions for connecting the communication cable to the indoor unit.
Instructions for connecting power and communication cables to the outdoor unit.
A checklist to verify installation steps before commissioning.
Steps to test the unit's functionality after installation.
Instructions for explaining system operation to the customer.
Explains fault codes indicated by flashing lights and provides a fault code table.
Lists common faults without specific error codes and their remedies.
Information on environmentally friendly packaging and recycling.
Guidelines for dismantling and recycling used appliances.
Symbol explanation and regulations for disposing of old electronic equipment.
Instructions for disposing of batteries.