Technical information and reports
35
Compress 5800i AW – 6721858460 (2023/06)
10.2.2 Heating circuit without mixer
Fig. 40 Indoor unit Tower, Heat pump (ODU), one unmixed heating circuit
[1] Mounted in the indoor unit
[5] Mounted on the wall
1) Non-return valve: it is mandatory to install a non-return valve to
use the cooling mode (see required accessories chapter in
2.8.1).
2) VC4 is required for the recommended filling procedure
3) Expansion vessel (external expansion vessel, if it is not
integrated)
0010038887-007
To Next Page
Loading...
